<td id="g4h3m"><ruby id="g4h3m"></ruby></td>
<track id="g4h3m"><ruby id="g4h3m"></ruby></track>
  • <p id="g4h3m"><del id="g4h3m"><xmp id="g4h3m"></xmp></del></p>

    <p id="g4h3m"></p>
      <td id="g4h3m"></td>
      歡迎光臨廣州南創工業品商城!
      荷蘭PENKO 2-Channel Flex稱重控制器

       

      產品品牌:荷蘭PENKO
      產品名稱:PENKO 2-Channel Flex稱重儀表,荷蘭PENKO 2-Channel Flex稱重控制器
      咨詢電話:020-82303306
      產品地址:http://pay.nchauto.com/
      您還在為買不到合適的荷蘭PENKO稱重儀表而煩惱嗎?廣州南創電子科技有限公司與荷蘭PENKO公司成為貿易聯盟,打造荷蘭PENKO品牌優質供應商。
      荷蘭PENKO 2-Channel Flex稱重控制器產品描述:
          兩通道全觸屏高速控制器,用于任何類型的稱重、測力、扭矩和配料場合。廣泛應用于料斗秤、包裝秤、皮帶秤、分選秤及配料系統時,可使稱量過程準確無誤、高效方便。
      SPECIFICATIONS 
      Specification for each individual weighing channel (Channel 1-4):
      Wiring                     Full Wheatstone bridge with passive connections (6-wire system).
      Sense system              Passive sense system
      Minimum bridge resistance  87.5 Ohm @ 5V exc.
      Number of load cells       1 channel 1 - 4 Load cells 350 Ohm @ 5V exc.
                                 1 - 8 Load cells 1100 Ohm @ 5V exc.
      Sensitivity                0.1–0.5 µV minimum voltage for verification scale 
                                 Certified with 0.4 µV per part / 10000 parts
      A/D Conversion Speed       1600 measurements per second
      Internal Resolution        24 Bits (16,777,216 parts)
      A/D Converter type         Sigma-Delta, ratio metric, isolated from digital
      Display Resolution         100,000 divisions max.
      Display Step               x1, x2, x5, x10,x 20 x50, x100, x200.
      Decimal Comma              Selectable between any digits of the display value
      Full Scale Range           -2.5 mV to +11.25 mV ( -0.5mV/V to +2.25mV/V)
      Excitation voltage         5 VDC 
      Non Linearity              < 0.005 % of reading
      Offset Drift               < +/- 2 ppm/°C
      Span Drift                 < +/- 2 ppm/°C
      Digital Filters            High performance digital filters 1-10 Hz
      Overall Filter             0 to -50 dB
      Calibration Methods        Dead load and Span
      荷蘭PENKO 2-Channel Flex稱重控制器規格


      荷蘭PENKO 2-Channel Flex稱重控制器關鍵特性:
      ◆ 2通道實時控制
      ◆ 5.7英寸全觸屏高分辨率TFT LCD 640x480像素彩色顯示屏,6位顯示
      ◆ 1600次/秒的采樣速率
      ◆ 非線性<0.005%
      ◆ 內置分辨率24比特
      ◆ 可連8個350Ω 稱重傳感器
      ◆ 自動零點跟蹤、動態檢測、零點、皮重、預設皮重、凈重模式、峰值保持、谷值保存、條形圖多級范圍、多級間隔
      ◆ 可選模擬量輸出:4-20毫安,0-20毫安,4-24毫安和0-24毫安
      ◆ 可選RS232、RS422、RS485、以太網、USB、Canbus及Profibus DP協議
      ◆ 電源18...32 V DC, 或100...240V AC(可選)
      荷蘭PENKO 2-Channel Flex稱重控制器使用說明


      Option 4 PT100/DI/DO/USB
      2 PT100 input        2 x PT100 inputs
      8 Digital Inputs     8 DI optical isolated, 1common, 18-36 VDC, PNP or NPN.
      8 Digital Outputs    8 DO isolated PhotoMOS outputs, 2 commons max. 36 VDC or AC, max                  0.5A. Nominal, 1 A Surge (thermal fuse 0.5A),
      PNP or NPN.
      1 x USB port         Printer, ASCII and host functions
      如果你對PENKO 2-Channel Flex稱重儀表,荷蘭PENKO 2-Channel Flex稱重控制器安裝,調試、產品尺寸,使方面有任何疑問,可直接來電咨詢荷蘭PENKO公司大陸合作伙伴廣州南創電子科技有限公司。

      關于南創

       

      又爽又粗又壮又爽A级毛片免费看_国产午夜精品男女一级爽_亚洲Aⅴ狠狠爱一区二区三区_国产痴汉AV中文在线观看

      <td id="g4h3m"><ruby id="g4h3m"></ruby></td>
      <track id="g4h3m"><ruby id="g4h3m"></ruby></track>
    1. <p id="g4h3m"><del id="g4h3m"><xmp id="g4h3m"></xmp></del></p>

      <p id="g4h3m"></p>
        <td id="g4h3m"></td>